
The TPMS light meaning is simpler than most drivers think: your car is telling you that at least one tire is low on air, or that the sensor system has a problem. Here's how to tell which one, and what to do.
Steady Light vs Flashing Light
- Steady: one or more tires are low, generally 25% or more below the recommended pressure
- Flashing for about a minute, then steady: the system has a fault, such as a dead sensor battery
What to Do When It Comes On
- Find a safe place and visually check all four tires
- Use a gauge to check each tire's pressure when cold
- Inflate to the number on the driver's door jamb
- Drive a few miles; the light often resets
- If it stays on, a tire may have a slow leak or a sensor needs service
Common Causes
- Natural pressure loss, about 1 PSI per month
- Cold weather drops
- Nail or screw puncture
- Faulty or expired sensor
Do Not Ignore It
Driving on a low tire hurts fuel economy, wears the tire unevenly, and raises blowout risk. See NHTSA tire safety information for safety context.
The Cold Morning Surprise
If the TPMS light comes on after the first cold night of fall, that's usually normal. Air shrinks when it gets cold, and your pressure can drop enough to trigger the warning. Add air to the number on the driver's door placard and the light often goes off after a short drive.
When the Light Won't Go Away
If you've filled all four tires and the light stays on, you may have a slow leak from a nail or a bad valve stem. A flashing light that turns steady usually points to a sensor issue. Either way, it's worth a proper inspection rather than ignoring it.
Related Guides
Final Verdict
A TPMS light is a warning, not a suggestion. Check pressure the same day. If you cannot find the cause, call us and we can inspect and repair the tire where you are.
Need help now? Call Dad of the Roads at 301-556-3973. We serve Silver Spring, Montgomery County, and the DC metro area.
Need Tire Service in Maryland?
Call us 24/7 โ we come to you.
๐ 301-556-3973